

Withstands multiple drops 8.0 ft./2.4 m to concreteĮSD per EN6, ☑5 KV Air discharge, ☘ KV Direct discharge, ☘ KV Indirect dischargeĮSD per EN6, ☒5 KV Air discharge, ☑0 KV Direct discharge, ☑0 KV Indirect dischargeĮN 60950-1 2ed + A11 + A1 + A12 + A2:2013, IEC 60950-1 2ed + A1 + A2, UL 60950-1, CAN/CSA-C22.2 No. Withstands multiple drops 5.0 ft./1.5 m to concrete RTA provides the AOI to make installation as easy as possible. Just enter the PLC type and the PLC’s IP Address into the gateway. package includes the handheld barcode scanner(s), the 435NBX ASCII to PLC gateway, and all required cabling to make your application work. You connect the gateway via ethernet to the PLC and attach the RED andīLACK power cables to a 24VDC, no additional components are needed! A true single source solution! All the cabling and power regulation hardware is included. The solution connects to the PLC via Ethernet greatly enhancing your placement options. AOI’s are included to simplify the usage in Control & CompactLogix PLC’s. ASCII strings are parsed and delivered directly into a data table of your A-B PLC. You also have to deal with an alternative power option. Even if you have the physical layer problem solved you still have scanners that need to be mounted within ten feet of the PLC. Few PLC’s still have serial ports and the USB is designed for programming only. The scanners also support physical layers like RS-232 and USB. The problem is barcode scanners provide ASCII data that is hard to deal with in an A-B PLC. solution is the easiest and quickest way to add handheld barcode scanning to an A-B PLC, we will buy the package back.Ī Better Way to Add Barcode Scanning to your PLC! Is an all in one solution that provides everything you need to easily get barcode data into your A-B PLC application. Package: Handheld Barcode Scanning for your Allen-Bradley PLC!Ĭongratulations! You’ve found the easiest way to add handheld barcode scanning to MicroLogix, ControlLogix, CompactLogix, FlexLogix, PLC-5, and SLC5/05 Allen-Bradley PLCs.
